Rotate an object with arrow

 

This article applies to RapidManual and RapidLearning.

To rotate an object with arrow, please follow the steps below.

·         Create Remove the threaded fastener (or any other Rotate with Anti–Strobe) action;

·         Refresh Procedure;

·         Expand the action and click on the Screw’s value;

·         Align the axes so that Y axis shows the direction of movement while rotating;

·         Click Apply, OK and Refresh Procedure;

·         Enable rotation (showRotation: ON);

   ·         Adjust arrow or screw values as required.